Overview of all K&M iPad & tablet holders

51 comments

• Tyler Eve says:

  18. April 2017 at 13:14

  Will a Holder be coming for the 2017 ipad?

  Reply
  • König & Meyer says:

    18. April 2017 at 13:55

    Our iPad Air holders are suitable for the 2017 iPad!
    19724 iPad Air holder: https://produkte.k-m.de/en/product?info=1445
    19714 iPad Air stand holder: https://produkte.k-m.de/en/product?info=1444
    19774 iPad Air stand: https://produkte.k-m.de/en/product?info=1441
    Regards, Sandra [Team K&M]

    Reply
    • Tyler Eve says:

      18. April 2017 at 14:11

      Oh wow! That’s great, thanks for your help!

      Reply
• Antigoni Tsalla says:

  13. September 2017 at 21:20

  Hello, can

  19728 holder be used as well as the 19718 but without the clamp?? Thanks

  Reply
  • König & Meyer says:

    16. September 2017 at 10:25

    Hi Antigoni
    yes that´s right. The 19728 holder alternatively can be screwed on to 3/8” thread connectors.
    Regards, Sandra [Team K&M]

    Reply
    • Antigoni Tsalla says:

      18. September 2017 at 20:02

      Thank you very much!!!

      Reply
• William says:

  18. November 2017 at 22:32

  Is there a stand for archos 133? Height 337 width 220

  Reply
  • König & Meyer says:

    21. November 2017 at 0:18

    Hi William, the Tablet PC Holder 19740 and Tablet PC Stand Holder 19742 are suitable. They hold tablets with a height form 120-222 mm. Maybe you have to use the holder without our additional guard arm (page 5 point “E”: http://bit.ly/2iAkMX1) …just if the tablet is not centered.

    Reply
• Sareena Paul says:

  24. November 2017 at 13:00

  Great pics, they really look better than I thought.Those Ipad stand just look fantastic!

  Reply
• David Caswell says:

  25. July 2018 at 13:22

  Hi, I’m looking for a solution that will allow two ipad pro12.9 to be mounted in portrait mode alongside each other to give a double a4 page view. Do you have any mounts that might allow this setup? Obviously a sturdy music stand would work, but there is the worry that the ipads could be knocked off, unless they were secured in some way. Grateful for any advice you could offer.

  Reply
  • König & Meyer says:

    26. July 2018 at 13:27

    Hi David
    Yes, there is a suitable product. You can use our Orchestra music stand with tablet holder:
    https://produkte.k-m.de/en/Music-stands/Music-stands-with-non-collapsible-desk/11965-Orchestra-music-stand-with-tablet-holder-black
    Best regards, Sandra [Team K&M]

    Reply
    • David Caswell says:

      27. July 2018 at 21:47

      Hi Sandra, thanks for your reply. The stand looks great! Just one question, is it possible to buy separately a couple of extra securing bolts? As there will be two ipads it might be necessary to help make the tablets more secure.
      Many thanks,
      David

      Reply
      • König & Meyer says:

        2. August 2018 at 16:59

        Hi David,
        please contact your distributor and order the K&M product 6-21285-2-55. You could order the clamping (“securing”) bolts at the same time as the orchestra music stand.
        Best regards, Sandra [Team K&M]

        Reply
• Garry Atkins says:

  6. August 2018 at 0:17

  I have a K & M holder i’ve purchased for my ipad Air 2. However, I must have purchased the incorrect model as my iPad only can br attached to mic stand in the landscape position. Top piece do not slide upward enough to work in the device (long side vertical)portrait position. Can you help? Can you supply me with a longer upper slide piece?

  Reply
  • König & Meyer says:

    6. August 2018 at 11:56

    Hi Garry,
    you can find the suitable holders for an iPad Air 2 in the lists above. Which holder have you purchased? We´re sorry but we are not quite sure what the problem is and how we could help. So please write an e-mail at socialmedia@k-m.de
    You can tell us the product number and send a photo of the “problem”.
    Thanks & regards, Sandra [Team K&M]

    Reply
• Norton 360 Support says:

  1. September 2018 at 10:03

  I’m looking for a solution that will allow two iPad pro12.9 to be mounted in portrait mode alongside each other to give a double a4 page view. Do you have any mounts that might allow this setup?

  Reply
  • König & Meyer says:

    18. September 2018 at 11:02

    Hello
    Yes, there is a suitable product. You can use our Orchestra music stand with tablet holder:
    https://produkte.k-m.de/en/Music-stands/Music-stands-with-non-collapsible-desk/11965-Orchestra-music-stand-with-tablet-holder-black
    Best regards, Sandra [Team K&M]

    Reply
• Tom says:

  10. September 2018 at 20:59

  Does your tablet holder 19790.516.55 feature European or American sized threading? Do you include an adapter with each?

  Reply
  • König & Meyer says:

    18. September 2018 at 10:44

    Hi Tom,
    the Tablet holder 19790-316-55 has a 3/8″ female thread for the Eurpoean market and the holder 19790-516-55 has a 5/8″ female thread for the US market.
    Best regards
    Sandra [Team K&M]

    Reply
• Norbert Abela says:

  9. October 2018 at 17:23

  Hi Tom

  I have the new ipad 9.7 inch with dimensions as follows- Height: 240 mm (9.4 inches), Width: 169.5 mm (6.6 inches) and Depth: 7.5 mm (0.29 inch). I am not sure if to get the 19777 or the 19774. Can you gently suggest.

  thanks

  Reply
  • König & Meyer says:

    10. October 2018 at 10:43

    We suggest the 19774-300-55!
    Best regards,
    Sandra [Team K&M]

    Reply
• Tom says:

  31. October 2018 at 15:31

  Hello,
  I have a holder for 3rd gen iPad and am purchasing a 5th gen as well. Can I just order a cradle to interchange with the original holder clamp?

  Reply
  • König & Meyer says:

    6. November 2018 at 12:26

    Hi Tom,
    yes you can order a new “bearing plate for iPad Air”. Please contact your distributor and ask for the product 01-88-205-55.
    Best regards, Sandra [Team K&M]

    Reply
• Tom says:

  25. November 2018 at 0:00

  Will an update be coming to the 19790 to support the 2018 iPad Pro 12.9″ It appears from the specs that the new iPad Pro 2018 12.9″ is too thin to fit the depth requirements of the 19790?

  Also, is the 19790-316-55 model simply an 19790-516-55 with the 5/8″ to 3/8″ adapter already inserted, or is it for 3/8″ only? I have a K&M Tablet Holder which screws on to a mic stand directly and requires a 5/8″ female thread, and another K&M tablet holder which uses the steel arm to bolt on to the pole of a mic stand or other device which has a 3/8″ male screw thread holding the tablet cradle. I am looking for a tablet holder for the 2018 iPad Pro 12.9″ which can fit both, so ideally it would be built with the 5/8″ female thread and include the 5/8″-3/8″ adapter installed.

  Also, can you confirm the previous answer, that it is possible to purchase just the iPad plastic cradle to swap it out with another holder’s? I have purchased tablet holder for an iPad 2 (not the iPad Air 2, the original iPad 2) and an iPad mini 2. All I need is the plastic cradle assembly that holds an iPad Pro 2018 12.9″, not the hinge/swivel assembly or the steel bracket arm.

  Thanks.

  Reply
  • König & Meyer says:

    26. November 2018 at 22:40

    Hi Tom
    The holders 19790 and 19791 are suitable for the new iPad.
    You should choose the 19791-016-55 and the 216 Thread adapter.

    Yes, that´s right: The only difference between the 19790-316-55 and -516- is the threaded bolt.

    Regards, Sandra [Team K&M]

    Reply
    • Tom says:

      29. November 2018 at 21:33

      Thanks for your reply Sandra. Do you know if the bearing plate for the 19790/1979x series is available for purchase as a separate part? I’d like to reuse the other parts of the K&M holders for my obsolete iPads.

      Thanks.

      Reply
      • König & Meyer says:

        30. November 2018 at 14:12

        We´re sorry, the bearing plate is not available as a separate part.
        But if you want to reuse other parts, our holder 19790 could be the right choice.

        Reply
• Karlo says:

  29. December 2018 at 15:00

  Hello! I have HP Envy X360 convertible notebook. Its dimensions when converted to tablet mode are 252mm x 362mm (cca. 10″ x 15″) and weighs 2.2 kg (cca. 5 pounds).
  Is there a stand for it?

  Reply
  • König & Meyer says:

    7. January 2019 at 15:20

    We‘re sorry. None of the stands above is suitable for your product. Maybe you would like to use our orchestra music stand with tablet holder: https://produkte.k-m.de/en/Music-stands/Music-stands-with-non-collapsible-desk/11965-Orchestra-music-stand-with-tablet-holder-black

    Reply
• Steve Scarfe says:

  11. March 2019 at 2:28

  I’m looking for a tablet stand for my Samsung Tab A (10.1) Preferably to hold it securely with the protective case still attached. Thanks
  Steve

  Reply
  • König & Meyer says:

    11. March 2019 at 13:15

    Hi Steve, our Tablet PC Holder 19791 or Tablet PC Stand Holder 19790 (19790) are suitable for your tablet. Whether you can use it with the case depends on the depth of the tablet (plus case). Our holder´s depth is from 6 to 11 mm.

    Reply
• Rob McKerlie says:

  17. July 2019 at 0:06

  Hi,
  I have a 2018 12.9 iPad Pro and would like to purchase a suitable mount and stand that holds the iPad securely for both rehearsals and playing in an orchestra.
  Thanks
  Rob

  Reply
  • König & Meyer - Team says:

    19. July 2019 at 12:42

    Hi Rob,

    thanks for your inquiry and also for the trust in our brand.
    We recommend you the article 19793. You can also combine article 19791 with the stand you prefer, for example article 26010, or 26125.

    If you have any further questions, please don’t hesitate to contact us.

    Reply
• Kiril says:

  23. July 2019 at 10:58

  Hi guys,
  I like a lot your iPad holder!
  Is there any chance to mount it on a tube that is 34 mm. I see the max you mention is 30 mm but in case there is some reserve …

  Reply
• König & Meyer says:

  31. July 2019 at 22:07

  Hi Kiril
  Sorry I’m late for answering.
  An I’m afraid it doesn’t fit. There is no reserve…
  We are developing a new attachment. But it may take some time. Possibly at the beginning of 2020.

  Reply
• Deryl P says:

  18. November 2019 at 12:35

  This is my unit measurements Width
  14.81 in. (376.20 mm)
  Depth
  0.33 in. (8.50 mm)
  Height
  9.25 in. (235.20 mm)
  Weight
  1.81 lbs. (0.824 kg)

  The product is called AOC i1601fwux 15.6″ Full HD 60Hz USB Type-C Portable LED Monitor and microcenter store sells it, would any of your media tablet stand work for me?

  Reply
• Jochen (K&M-Team) says:

  19. November 2019 at 9:29

  We‘re sorry. None of the stands above is suitable for your product. Maybe you would like to use our orchestra music stand with tablet holder: https://produkte.k-m.de/en/Music-stands/Music-stands-with-non-collapsible-desk/11965-Orchestra-music-stand-with-tablet-holder-black

  Reply
• DERYL C PRESBERRY says:

  19. November 2019 at 11:38

  hopefully you guys build one in the near future because yeah I’m only interested in mounted desk gear, I could
  get a flat stand any where

  Reply
• mireille says:

  26. November 2019 at 14:55

  Can you recommend the stand that fits the Samsung Galaxy Tab S6?

  Reply
• Jochen (K&M-Team) says:

  26. November 2019 at 17:15

  We can recommend the following products 19740 & 19742 just as 19790 – 19794

  Reply
• mireille says:

  27. November 2019 at 8:14

  Recommendation is valid even though the depth of the galaxa tab S6 is less then 6mm (5.7mm)?

  Reply
• Fabian Brüne says:

  27. November 2019 at 9:47

  Hey Mireille,
  0,3 mm is no big deal.
  Best regards,
  your K&M-Team.

  Reply
• Hywel Morgan says:

  16. April 2020 at 15:24

  Hi there, just taken delivery of the 19712 and it doesn’t fit my iPad 4 despite the instructions saying it does. Model number is A1460 / MD524B/A as per the table above but it doesn’t clip in and would fall out if it was mounted on a mic stand. Are there different sizes?

  Reply
  • Jochen Erbacher says:

    17. April 2020 at 11:18

    Hi Hywel, there is fix. Please have a look at the follwoning instruction: http://mailing.k-m.de/downloads/19712ff_instructions.pdf Best regards, Jochen K&M-Team

    Reply
• Dave Wettlaufer says:

  22. May 2020 at 3:09

  Hello, I just got the iPad Pro 4th Gen, 12.9″ wifi + cell model #A2069. I didn’t see it listed above anywhere. I want a holder that will screw onto a 3/8 stud. Which model would work? Thanks,

  Reply
  • Fabian Brüne says:

    26. May 2020 at 9:29

    Hi Dave,
    unfortunately the list is not updated yet. Your iPad has the same dimensions as the 3rd generation iPad Pro 12.9″. (280,6mm x 214,9mm x 5,9mm)
    Therefore all holders in the category iPad Pro fit your device.
    Best regards,
    your K&M-Team

    Reply
• Luc says:

  1. June 2020 at 14:10

  Hi,
  Do you have a holder for the surface book tablet 15 inch?

  Reply
  • Fabian Brüne says:

    2. June 2020 at 11:55

    Hi Luc,
    thanks for your message.
    Unfortunately not. Our tablet holder with the largest holding plate can only hold tablets with a height of 222-334 mm, a width of 128-232 mm and a depth of 6-11 mm. Your tablet has slightly larger dimensions.

    Best regards,
    your K&M-Team

    Reply
• Luc De Groote says:

  15. October 2021 at 13:04

  Please make a holder for the 15″ Surfacebook (343 x 251 mm)

  Reply
• Stuart says:

  4. October 2023 at 22:21

  I have an HP x2 11 Chromebook with removable keyboard – so a tablet when the keyboard is disconnected. The tablet portion is 25.25 x 17.66 x 0.75 cm and weighs about 1 kg. What holder would you recommend? I would prefer a screw-on adapter. Thanks.

  Reply
  • Fabian Brüne says:

    22. November 2023 at 15:53

    Hi Stuart!
    Please excuse our very late reply.
    According to the mentioned dimensions, the following holders fit your tablet:
    Tablet PC stand holder 19790
    Tablet PC holder 19791
    Tablet PC table stand 19792
    Tablet PC stand 19793
    Tablet PC stand 19855

    Best regards,
    your K&M Social Team

    Reply